IKG4101 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat IKG4101 is a motor power cable in the IKG Motor Power Cables series. It features 3 power conductors of 6.0 mm² and control wires of 1.0 mm² and 1.5 mm². The cable has a PUR jacket in RAL 2003 orange with an outer diameter of 18.5 mm and a separable connection design.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The IKG4101 cable is a pre-assembled motor power lead produced by Bosch Rexroth Indramat and supplied within the IKG Motor Power Cables series. It links a synchronous or asynchronous drive to its controller, carrying mains power alongside low-voltage control signals required for temperature sensing or brake release inside industrial automation cells.
The cable uses bulk wire type INK0604 and terminates with an INS0481/C06 motor connector and an INS0482/C06 controller plug, both using a separable connection scheme that simplifies exchange during maintenance. A 5 x D minimum bend radius is allowed for fixed routing, while dynamic drag-chain applications require a wider 7.5 x D radius to protect the insulation system. The PUR outer jacket, finished in RAL 2003 orange, resists oils and weld spatter while limiting electromagnetic emissions. At a diameter of 18.5 mm, the assembly carries three phase conductors rated at 3x6.0 mm² plus a protective earth of 6.0 mm². Two auxiliary pairs, sized 1.0 mm² and 1.5 mm², deliver sensor and brake currents without a separate harness.
The power cores withstand operating potentials up to 300/500 V, and the paired control leads are limited to 300/300 V, letting the cable serve low-voltage feedback circuits alongside the motor supply in a single sheath. Continuous installation temperature may reach +90 °C, while moving applications must stay within +80 °C to avoid premature jacket fatigue. These thermal limits correspond to the PUR insulation class and align with the specified bend radii so that mechanical stress and heat do not combine to damage conductors. By integrating phase, earth, and control wires in one assembly, IKG4101 reduces panel space and cable tray load, while the separable connectors permit rapid replacement during servo upgrade cycles.
Frequently Asked Questions about IKG4101:
Q: What type of connection does the IKG4101 motor power cable use?
A: The IKG4101 features a separable connection type, allowing for straightforward installation and removal.
Q: What is the bend radius requirement for the IKG4101 cable in fixed and flexible installations?
A: The IKG4101 has a minimum bend radius of 5 times the cable diameter when fixed and 7.5 times the diameter when flexible.
Q: What material and color is the outer jacket of the IKG4101 cable?
A: The outer jacket of the IKG4101 cable is made from PUR and is colored RAL 2003 orange.
Q: Which connector is used on the controller side of the IKG4101 cable?
A: The controller-side connector of the IKG4101 is the INS0482/C06 model.
Q: What are the operating voltage ratings for power and control wires on the IKG4101 cable?
A: The IKG4101 supports an operating voltage of 300/500 V for power conductors and 300/300 V for control wires.
