IKG4060 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat IKG4060 is part of the IKG Motor Power Cables series. This motor power cable features 4 power conductors of 1.5 mm² each and 2 pairs of 0.75 mm² control wires, with a PUR jacket and an outside diameter of 12.2 mm. It is rated for a maximum current of 15.7 A at 40°C, has a maximum ambient temperature of 40°C, and supports up to 5 million bending cycles.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The IKG4060 is a motor power cable produced by Bosch Rexroth Indramat for the IKG Motor Power Cables series. Designed as the power link between Indramat servo drives and synchronous motors, the cable routes three-phase energy and auxiliary signals in automated machinery. Its construction supports continuous-flexing environments such as gantry axes and pick-and-place modules, while the integrated signal pairs allow drive controllers to monitor motor temperature or brake status through the same assembly. By combining power and control conductors within a single shielded jacket, the cable reduces cabinet wiring time and maintains electromagnetic compatibility on moving axes in industrial automation.
Four copper power cores carry phase current in a 4 × 1.5 mm² conductor layout that balances ampacity with flexibility for medium-frame servo motors. Two shielded signal pairs, each with a conductor cross-section of 0.75 mm², are embedded for brake or sensor circuits, eliminating the need for a separate feedback lead. The cable transmits up to 15.7 A continuously at an ambient temperature of +40 °C, matching the thermal limits of typical drive outputs. A halogen-free PUR outer jacket provides abrasion resistance and coolant tolerance for machine-tool carriers. The overall diameter is limited to 12.2 mm, allowing tight bundle routing in drag-chain energy tracks.
Conductors can reach a peak temperature of +80 °C without degrading the insulation, so intermittent overloads or warm cabinet zones remain within safe limits. The minimum bend radius is 7.5 × D during dynamic movement and 5 × D for stationary routing, supporting compact loops on linear axes. Mechanical endurance is rated for 5 million bending cycles, making the cable suitable for high-duty gantry applications operating across three shifts. Operation remains possible from -20 °C during motion and down to -30 °C when the cable is installed in a fixed run, while continuous service is permitted at ambient temperatures up to +40 °C.
