IKG4051 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 1-2 Days
The Bosch Rexroth Indramat IKG4051 is part of the IKG Motor Power Cables series and has an overall diameter of 12.2 mm. It features 4 x 1.5 mm² power conductors, 4 x 0.75 mm² auxiliary conductors, and a PUR jacket in RAL 2003 orange. This cable supports a control and power wire voltage of 600 V AC, and has maximum wire temperatures of 90°C fixed and 80°C flexible.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The IKG4051 belongs to the IKG Motor Power Cables series manufactured by Bosch Rexroth Indramat. This pre-assembled cable connects IndraDrive controllers to corresponding servomotors, carrying three-phase power and auxiliary signals needed for coordinated motion in automated machinery.
The cable employs power cores of 4 x 1.5 mm² that carry up to 600 V AC to the motor without excessive voltage drop. An overall diameter of 12.2 mm balances ampacity with routing space inside cable trays, while the outer sheath is moulded from PUR to resist oils and constant flexing. For drag-chain movements, the minimum dynamic bend radius is only 7.5 x D, limiting mechanical stress on conductors. Factory-fitted connectors—INS0482/C02 on the controller end and INS0481/C02 on the motor end—eliminate field crimping and ensure shielding continuity. The orange jacket specified as RAL 2003 gives clear visual identification among signal cabling and meets European safety colour codes.
Low-level circuitry is handled by auxiliary wires of 4 x 0.75 mm², and the bundle’s loop resistance is held to 13.3 Ohm/km to preserve feedback integrity. A mutual capacitance of 0.8 nF/m minimises reactive charging currents, important for high-frequency PWM drives. When the cable is fixed, it tolerates conductor temperatures up to 90 C; in flexing chains the limit is 80 °C. Static installations may use a bend radius of 5 × D without compromising insulation, and both power and control cores share the same 600 V rating for simplified cabinet grounding.
Wake Industrial stocks this cable. Same-day shipping is available for urgent assemblies. Quotes issued for this part remain valid for 30 days, simplifying budget planning.
Frequently Asked Questions about IKG4051:
Q: How many auxiliary conductors are included in the IKG4051 cable and what is their size?
A: The IKG4051 power cable features four auxiliary conductors, each with a cross-sectional area of 0.75 mm².
Q: What is the minimum bending radius for the IKG4051 cable when fixed?
A: This cable has a minimum bend radius of 5 times the diameter when installed in a fixed position.
Q: What type and color of outer jacket does the IKG4051 power cable have?
A: The IKG4051 uses a durable PUR jacket that is colored orange, following RAL 2003.
Q: What is the maximum wire temperature for the IKG4051 cable when fixed?
A: The maximum operating temperature of the IKG4051 cable is 90°C for fixed installations.
Q: What types of connectors are used on the IKG4051 cable for the controller and motor ends?
A: This cable is equipped with a controller connector type INS0482/C02 and a motor connector type INS0481/C02.
