IKG4010 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The Bosch Rexroth Indramat IKG4010 is part of the IKG Motor Power Cables series and features four power conductors with a conductor size of 1.0 mm², plus two control pairs at 0.75 mm² each. This cable has a PUR matte jacket in RAL 2003 orange and operates at up to 600 V AC. Its capacitance is 0.6 nF/m, with a fixed bending radius of 5 times the diameter and an overall diameter of 12 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The IKG4010 belongs to the IKG Motor Power Cables series from Bosch Rexroth Indramat. It is a pre-assembled motor supply cable intended for routing three-phase power and auxiliary control signals between an Indramat servo drive and its associated motor in automated machinery. By integrating power cores, two control pairs, and braided shielding in a single PUR jacket, the product simplifies cabinet wiring and helps maintain electromagnetic compatibility inside industrial motion systems.
This cable is designed for fixed routing at a minimum bend of 5 × D and for continuously flexing installations down to 7.5 × D, so energy-chain layouts can be planned without overstressing the conductors. The four power cores are dimensioned at 4 × 1.0 mm², matching drive outputs that demand modest phase currents, while the insulation system supports up to 600 V AC. An overall diameter of 12.0 mm keeps fill factors low in drag-chain compartments, and a PUR matte sheath resists cutting oils and abrasion while remaining adhesion-free to adjacent cables. StC braided shielding encloses the twisted power bundle to limit conducted and radiated noise toward neighbouring feedback and I/O links.
The two signal pairs, sized at 0.6 nF/m of mutual capacitance and a line resistance of 19.5 Ω/km, permit reliable brake-release or temperature sensor pulses without requiring separate conduits. Each pair uses a cross-section of 0.75 mm² to minimise voltage drop over long runs, and the orange jacket coded RAL 2003 allows quick identification of live motor feeds inside multi-cable trays. With these electrical parameters and the specified pair count, the cable supports synchronous-motor installations that need integrated control conductors while retaining predictable impedance for high-frequency inverter switching.
Frequently Asked Questions about IKG4010:
Q: What is the minimum bending radius for the IKG4010 cable when installed in a fixed position?
A: The IKG4010 motor power cable can handle a fixed bending radius of 5 times its overall diameter.
Q: What is the maximum operating voltage for the IKG4010 cable?
A: The operating voltage supported by the IKG4010 power cable is 600 V AC.
Q: What type of outer jacket material is used on the IKG4010 cable?
A: The IKG4010 features a jacket made from PUR that is adhesion-free and matte in finish.
Q: How many power conductors does the IKG4010 cable contain inside its jacket?
A: There are four power conductors present in the IKG4010 cable.
Q: What is the overall diameter of the IKG4010 motor power cable?
A: The overall external diameter of the IKG4010 cable is 12.0 mm.
