IKG0301 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN:
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat IKG0301 is part of the IKG Motor Power Cables series and features Class 6 conductor stranding and overall shielding with a tinned copper braid. This cable is rated for a power nominal voltage of 600/1000 V and a signal nominal voltage of 300 V, with a PUR orange jacket and a maximum static operating temperature of 80 °C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The IKG0301 is a motor power cable assembled by Bosch Rexroth Indramat for use in the IKG Motor Power Cables series. It links servo drives to motors in automated machinery, providing simultaneous transmission of power and signal conductors within a single shielded assembly. By combining both circuits, the cable reduces cabinet wiring and supports electromagnetic compatibility in moving cable chains and static cable trays on factory floors. This arrangement helps keep motor power and auxiliary signaling in one cable run, which reduces routing complexity around axes that move repeatedly.
The copper conductors use Class 6 stranding, so each wire bundle remains highly flexible during continuous motion. To limit conducted and radiated noise, the power and signal cores are wrapped in a tinned copper braid that maintains low transfer impedance along the entire length. This shielding arrangement helps reduce interference between motor current and adjacent feedback signals. Power cores are rated for a nominal system potential of 600/1000 V, while the signal cores are limited to 300 V, which lets feedback electronics operate safely beside motor phases. Dielectric integrity on the power circuit is rated at 4 kV, providing insulation clearance against transient overvoltage. The cable tolerates a bend radius of 7.5 × OD in cable chains, 10 × OD during free flexing, and 6 × OD in fixed routing, which helps limit conductor stress.
During motion the cores may heat to +60 °C, and they can remain static up to 80 °C without jacket softening. At the lower extreme, service continues down to -30 °C in flexing runs and -50 °C when laid motionless, making the cable suitable for chilled production halls. The outer sheath is made of PUR, which provides abrasion resistance and oil rejection, and it is colored orange for visibility in machine areas. The orange jacket also makes the cable easier to identify in mixed harness bundles. The signal pair has insulation rated at 500 V, which helps protect encoder channels from cross-talk. Final terminations use the pre-molded INS0542-INK0653-INS0110 connector set, so installation does not require field soldering.
Frequently Asked Questions about IKG0301:
Q: What material is used for the outer jacket of the IKG0301 cable?
A: The IKG0301 cable uses a PUR jacket for enhanced durability and flexibility in industrial environments.
Q: What is the nominal voltage rating for power conductors on the IKG0301?
A: This cable supports a nominal voltage of 600/1000 V for power conductors, allowing for high-power transmission.
Q: What is the lowest static operating temperature the IKG0301 can withstand?
A: The minimum operating temperature for the IKG0301 in static applications is -50 °C.
Q: What type of shielding does the IKG0301 power cable offer?
A: The overall shielding on the IKG0301 cable is made with a tinned copper braid to help reduce electrical interference.
Q: What class of conductor stranding is used in the IKG0301?
A: The IKG0301 features Class 6 conductor stranding, which provides flexibility for dynamic cable routing.
