Product Description:

The HVR02.2-W010 is a power supply module from Bosch Rexroth Indramat. It occupies the DC-link position inside multi-axis drive cabinets and converts facility alternating current into stable direct current for servo inverters and regenerative braking circuits used in automated machinery. The module interfaces directly with standard plant distribution panels and supplies direct current to synchronous and induction motor drives. This arrangement lets several coordinated axes share one source during acceleration, deceleration, and controlled stopping sequences. It is intended for machine systems such as conveyor, packaging, and material-handling lines.

Electrical input is taken from three-phase mains at 3 x AC 380–480 V, and the module tolerates a plus-or-minus 10 percent variation before protective shutdown. From that supply, the rectifier section produces a regulated DC bus voltage that feeds multiple axis controllers without excessive ripple. The unit can sustain 10 kW of continuous output power, which supports simultaneous high-torque motion and regenerative energy return. This arrangement lets several connected inverters draw power from a common source while keeping the bus stable during rapid load changes. Thermal performance is maintained by internal air cooling with a built-in blower, so heat is removed from the power semiconductors and output chokes during extended duty cycles.

The unit belongs to the HVR Power Supply Units series. It is design Version 2 and part of Series 02, which places it in the second product iteration for this line. These codes indicate the intended revision of the module within the platform and help distinguish it from earlier releases. They also indicate the matching control-platform revision used in the same cabinet layout, keeping the module aligned with compatible companion drive controllers and related diagnostic functions.