Product Description:

The HMS01.1N-W0150-A-07-NNNN-AA is an axis inverter produced by Bosch Rexroth Indramat and belongs to the HMS Axis Inverters series. As an inverter, it processes energy from a shared DC bus and delivers regulated motor currents for coordinated multi-axis motion in gantries, packaging lines, and material-handling stations. This role lets the drive support controlled acceleration, steady running speed, and responsive deceleration on servo-driven axes. In a multi-axis system, one inverter channel typically handles a single motor axis while coordinating with neighboring power modules through the shared bus structure.

The unit uses internal air cooling with an integrated blower, so a dedicated fan moves cabinet air across the internal heat sinks. A rated output of 150 A allows the inverter to supply high motor current during demanding acceleration and load changes. This current capacity is useful on axes that must overcome high inertia or rapid cycle demands without immediate current limiting. The power stage is fed by a DC 700 V link, which gives the inverter the voltage headroom needed for fast current response and stable speed control. The housing is rated IP20, so the device is finger-safe but must be installed inside a protected electrical enclosure. The unit is design 1.

The unit is not equipped with an internal auxiliary supply, so external 24 V control power must be provided for the logic and gate-drive circuits. That arrangement keeps control power separate from the main power section and should be considered during cabinet layout. The inverter is Line Version 1 and is part of the HMS Axis Inverters family, which places it within the first released line configuration for this product type. The family assignment also helps keep module arrangement consistent within compatible drive groups installed in the same enclosure. It is manufactured by Bosch Rexroth Indramat.