HMS01.1N-W0020-A-07-NNNN-AA
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911326671
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The HMS01.1N-W0020-A-07-NNNN-AA Drive Controller is manufactured by Rexrtoh Indramat Bosch. This drive controller is Not Equipped with a power supply and has an Internal Air Blower cooling mode. The maximum current of this drive controller is 20 A and the nominal current is DC 700 V.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HMS01.1N-W0020-A-07-NNNN-AA is a power supply section to use in conjunction DC power supply unit. These power supply units are capable of delivering rated input current for power section applications. It also provides branch circuit protection according to the maximum voltage and current. The REXROTH Indramat manufactured HMS01.1N power supply can be used to optimized the current rating of motors and drives.
The HMS01.1N-W0020-A-07-NNNN-AA has a standard Indradrive’s the design and comes without a power supply. It has the internal air cooling through the integrated blower in a control cabin. The supply unit has a maximum current of 20A. The rated control voltage input of the supply unit is 24V with a tolerance of +/-20% and 3*AC 0 to 500V. It has a 10W rated power consumption control voltage when the motor has the drives, holding brake, and control section. The power supply requires 14A rated current and a 12.1A output current. The HMS01 has the 700V nominal DC bus voltage. The drive has a system frequency of 0-1000Hz. power dissipation at continuous DC bus power and continuous current is 165W.
The power supply unit has the standard UL of 508C and falls in a pollution degree of 2. The ambient temperature for the power supply unit is 40°C and derated nominal heat is 55°C. The power supply unit controller has a mass of 5.27kg. The power supply unit has 440mm height, 262mm depth, and 50mm width. The HMS01.1N-W0020-A-07-NNNN-AA power supply must be mount in the close housing or control cabinet. For the installation of the supply power the required tightening torque should be maintained from 0 to 5Nm along with a 1, 0 mm2 connection cable. The standard wire of 18 AWG is used for connecting the power with the power supply unit. There must establish a proper ground conductor for safety. It has an IP20 degree of protection. This unit can be shipped globally with a one-year warranty period from Wake Industrial.
