HMS01.1N-W0110-A-07-NNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911310462
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HMS01.1N-W0110-A-07-NNNN is an axis inverter that is part of the HMS Axis Inverters series. It features a cooling system with internal air and an integrated blower, and is rated for a maximum current of 110 Amps with a nominal DC bus voltage of 700 Volts. This device has an IP20 protection class and does not come with an internal power supply.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HMS01.1N-W0110-A-07-NNNN axis inverter is built by Bosch Rexroth Indramat and belongs to the HMS Axis Inverters series. It converts the shared DC-bus energy into regulated three-phase output for servo or induction motors while receiving control commands from higher-level drive controllers. In multi-axis machining centers, packaging stations, or gantry robots, the unit acts as the local power stage that produces precise torque and speed profiles for each connected motor, enabling synchronized motion without mechanical line-shafting.
This inverter uses internal air with integrated blower cooling, so an onboard fan forces air across the heat sink and keeps semiconductor junction temperatures within specified limits. Under continuous operation it can provide up to 110 A of phase current, a level that supports mid-range motor frames found in material-handling lines. The module draws energy from a common link that is maintained at DC 700 V; that voltage sets the ceiling for motor back-EMF and defines the insulation spacing inside the chassis. With a protection level of IP20, it must be mounted inside a closed control cabinet but offers unobstructed access to its terminals. Hardware labeling identifies the unit as design version 1, the first mechanical and firmware release in this family. In addition, it ships with no integrated power supply, so a separate supply unit is required to furnish the DC link and auxiliary voltages.
Within the product code the module is further grouped as line version 1, ensuring mating compatibility with mains rectifier sections that share the same line identifier. The manufacturer catalogs the device under the HMS product type, unifying firmware and commissioning tools across the range. Spare-parts logistics reference Bosch Rexroth Indramat to guarantee consistent accessory sets, while the common platform allows technicians to insert replacements into an existing HMS Axis Inverters stack without recalculating motor parameters or bus topology.
Frequently Asked Questions about HMS01.1N-W0110-A-07-NNNN:
Q: How is the HMS01.1N-W0110-A-07-NNNN inverter cooled?
A: The HMS01.1N-W0110-A-07-NNNN features internal air cooling with an integrated blower for temperature control.
Q: What is the protection class rating for the HMS01.1N-W0110-A-07-NNNN?
A: The HMS01.1N-W0110-A-07-NNNN is classified as a Protection Class IP20 device.
Q: What is the rated maximum current for the HMS01.1N-W0110-A-07-NNNN?
A: This model has a rated maximum current capacity of 110 A.
Q: What is the nominal DC bus voltage of the HMS01.1N-W0110-A-07-NNNN?
A: The nominal DC bus voltage for this inverter is DC 700 V.
Q: Is an internal power supply equipped in the HMS01.1N-W0110-A-07-NNNN inverter?
A: The HMS01.1N-W0110-A-07-NNNN does not include an internal power supply.
