HMD01.1N-W0036-A-07-NNNN
MPN: R911298766
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships Today
The HMD01.1N-W0036-A-07-NNNN Drive Controller is manufactured by Rexroth Indramat Bosch. This drive controller is Not Equipped with a power supply, has a peak current of 36 and a nominal voltage of DC 700 V. This HMD drive controller is cooled by using Internal Air.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HMD01.1N-W0036-A-07-NNNN power section is one of the several modules in the HMD product group from Bosch Rexroth. The product is fitted to a drive controller of the IndraDrive M series. It must be protected against penetrating foreign objects and liquids like water. The device is likely to experience high leakage current and high housing voltage during operation. The unit may experience dangerous movements in case there are defective components or there is an incorrect cable connection. The module is cooled during operation by using a blower for air circulation. It has a nominal Y-capacitance of 2 * 68 nF. The module also features a continuous output current of 13A at 8kHz and 20A at 4kHz.
The power section has a maximum ambient temperature rating of 55°C with reduced nominal data. The device must have a minimum clearance distance of 80mm at the top and 100mm at the bottom. It should be connected to the motor using shielded motor power cables. This product features a DC bus voltage of 254VDC to 750VDC. The unit must be placed at a distance of at least 400mm from magnetic components inside a control cabinet. The X6 connector of the module can be used to monitor the temperature of the connected motor. The HMD01.1N-W0036-A-07-NNNN device can be delivered worldwide to any address through FedEx, UPS, or DHL with a one-year warranty.
The Pin 4 and Pin 1 of the X6.1 and X6.2 connectors feature their coding sections. These coding sections help to prevent the two cables from getting interchanged accidentally. The solid and stranded connection cables of the unit have a minimum cross-sectional area of 0.5mm2 and a maximum of 1.5mm2. This product has a switching frequency of 0.5Hz and a 50ms time constant of the load. The device is used as a part of double-axis drive controllers. This unit can be shipped globally with a one-year warranty period from Wake Industrial.
Frequently Asked Questions about HMD01.1N-W0036-A-07-NNNN:
Q: What is the size of the HMD01.1N-W0036-A-07-NNNN?
A: The HMD01.1N-W0036-A-07-NNNN has a size of 440 x 262 x 75 mm. This size makes it suitable for installation in a control cabinet.
Q: What is the surface temperature of the HMD01.1N-W0036-A-07-NNNN during operation?
A: The surface temperature of the HMD01.1N-W0036-A-07-NNNN is more than 60 °C during operation. This hot surface can cause burns if it is touched.
Q: What is the cooling time of the HMD01.1N-W0036-A-07-NNNN?
A: The cooling time of the HMD01.1N-W0036-A-07-NNNN is 15 minutes. It is meant to be touched only after this period after the power supply has been turned off.
Q: What is the degree of protection of the HMD01.1N-W0036-A-07-NNNN?
A: The HMD01.1N-W0036-A-07-NNNN has an IP 20 degree of protection. Hence, it must always be installed in a control cabinet.
Q: What is included in the scope of supply of the HMD01.1N-W0036-A-07-NNNN?
A: The HMD01.1N-W0036-A-07-NNNN comes along with a touch guard, supporting connectors and the associated documentation. These accessories are intended to make the installation and use of the power section an easy process.
