Product Description
Motion control enables industries to fast track the manufacturing. Bosch Rexroth has established itself as a trusted supplier of automation machinery.
The HDS04.2-W200N-HT76-02-FW is a drive controller that enables the users to control the torque, position, and speed of servo motors. The drive controller has dual functionality. Besides, the servo mechanism can also regulate the motor's main spindle drive's motion. Because of this dual functionality, the system is widely used in printing machines, textile machines, and packaging machines. The drive controller's outer casing protects against the incursion of objects as large as 50 mm in size. This is in accordance with the IP 10 protection standards. The required settings and operational parameters can be pre-programmed in the system. This enables the HDS04.2-W200N-HT76-02-FW to constantly compare actual and programmed values. In the case of deviation from the set values, the controller's closed-loop mechanism is activated, and the motor's speed, position, or torque is re-adjusted.
The HDS04.2-W200N-HT76-02-FW’s standard comes with a firmware module, a command & communications module, and a basic unit with empty slots. The slots are provided for installing various modules. The operational settings are stored in the firmware module. Different interface cards can be integrated with the basic unit. The gear type encoders produced by Bosch Rexroth can also be connected with the system by using interface cards. This drive controller is famous for its rapid response, and it is often used with the company's MHD, 2AD, and MKD motors. For storage and transport, the device can be kept in a -30 ᵒC to 85 ᵒC temperature range. For the purpose of signal processing, the drive controller requires a 30 W power from a 26 V power source. The HDS04.2-W200N-HT76-02-FW can be shipped to any address globally with a one-year warranty period from Wake Industrial.
