Product Description

Bosch Rexroth designs the best drive controller for automation in industrial assembly lines. The drive controller is affordable and has high operational reliability.

The HDS04.2-W200N-HS73-01-FW is a drive control system from the HDS series and can be used for a wide variety of positioning and speed control tasks in the industrial assembly lines. The device is best utilized when used within a temperature range of 0 ᵒC to 45 ᵒC. In case of special requirements, the drive controller can be used in areas with external temperatures up to 55 ᵒC. In this case, the nominal performance parameters of the device are reduced as the temperature goes on to increase from 45 ᵒC to 55 ᵒC. This model has a design that can accommodate multiple models of industrial motors. The 1MB frameless motors, 2AD motors, MHD motors, HDS motors, and MKD motors can be used with this HDS drive controller. This model can be equipped with the HZF power connection module. The HZF module is used when high power applications are required.

The HDS04.2-W200N-HS73-01-FW can support a significantly higher number of start-stop cycles if the additional power capacitor HZK is installed. The drive controller has significant protection against electric shock owing to protective low voltage (PELV). The connected motors are protected against overtemperature failure because of an inbuilt temperature monitoring system of this device. This drive controller comes with the RS 232 and RS 485 interface options. The system weighs around 19 kg and has a 498 mm height, 308 mm depth, and 150 mm depth. The device has a maximum output voltage of 500 V and its maximum output frequency is 1000 Hz. This unit can be shipped globally with a one-year warranty period from Wake Industrial.