Product Description

The HDS01.1-W100-D Bosch Rexroth drive controller is one of the several HDS series of drive controllers from the manufacturer. This drive controller must be handled using only the appropriate moving or lifting equipment. The product should not be disassembled, cut, or opened in a pressurized state. This device must be checked for damage before it is put to use. It can be used in both single-axis and multiple-axis control and drive-related applications. The unit encompasses a modular structure. The controller has a basic unit, a configuration type plate, a software module, a command communications module, and additional plug-in modules. The slots in the basic unit are empty by default.

The drive controller is cooled by internal air circulation using an inbuilt blower. The maximum installation elevation for this product is 1,000m above sea level. Its configuration type-plate has various details of the configured drive controller, the software module, the basic unit, and the plug-in modules. This type-plate helps in identifying the modules associated with the controller. The plug-in modules are inserted in the U1 to U4 slots. The drive controller must be checked before startup to see if it features the modules listed on the configuration type-plate.

The product may get damaged if it is operated outside the ambient temperature range. The signal supply lines and load supply lines must be routed away from each other as much as possible to avoid interference. Its components are checked for insulation and high-voltage as per DIN VDE 0160 specifications. The basic unit comes equipped with a status display and a fault reset key. The status display highlights the warning and error messages encountered during operation. The X1 connector is used to connect the power supply for the device. The drive controller can be shipped through our reliable delivery network with a warranty period of one year.