HCS03.1E-W0150-A-05/S001

Product Description:

HCS03.1E-W0150-A-05/S001 is a Bosch Rexroth drive controller from the IndraDrive C series. It is used for industrial motor control applications. The drive controller consists of two main parts: a power section that connects to AC input and converts it to DC, and a control section that performs all computation and control related tasks. Bosch supplies assembled controllers with a control section mounted onto a power section. The two components are also available as individual units that can be assembled in the field. Connections on the power section include the mains voltage, the motor, an optional 24 Volts DC input, the module bus, the optional holding brake, an optional temperature sensor, and an optional braking resistor. Height of the HCS03.1E-W0150-A-05/S001 controller is 530 millimeters. Its width and depth are 225 millimeters and 315 millimeters respectively.

Maximum output current of the HCS03.1E-W0150-A-05/S001 controller is 150 Amps. It can connect to AC mains at 400 to 500 Volts AC. Connection of the unit to single-phase AC mains is not permitted. The controller is designed for internal air cooling. Protection class of the unit is IP20. The controller is designed for vertical mounting and weighs approximately 20 kilograms. The controller draws 106 Amps continuous input current. Without a mains choke, the mains connection power at 400 Volts AC is 72.9 kVA. With a mains choke, the mains connection power at 400 Volts AC is 54 kVA. Accidental contact with power terminals on the controller can lead to severe electric shock. Therefore, Bosch recommends using suitable touch guards for personnel safety. Only undamaged touch guards should be used. The maximum tightening torque used to fix screws on touch guards is 2.8 Nm.