Product Description

The Bosch Rexroth HCS01.1E-X0018-A-03-B-ET-EC-NN-L4-NN-FW is a best-in-class drive controller that should be used appropriately by reading the product documentation carefully and observing the necessary safety precautions. When the unit is live, the user should not remove or plug in its connectors, because it may cause electric shocks. The installation altitude of the device is 1000 m amsl under rated conditions. The product is equipped with three type plates for identification of the components as well as to display the technical data. There are adhesive labels attached to the device with safety notes. It should be noted that at the time of storage and transport of the device, there shouldn’t be any moisture condensation or icing. At the back of the HCS 01 drive controller, there are braking resistors that can turn too hot when the device is live. So, when organizing the devices within the control cabinet, the user should ensure that there aren’t any materials sensitive to heat near the braking resistors. One should wait 30 minutes after turning off power to let live capacitors discharge before accessing an electric part. The user must measure the electrical voltage of the live components before starting to work to ensure that the device is safe to touch. Before switching on, covers and guards provided for the purpose must be installed. The drive controller has a control panel aimed at programmable module functions. When the device is stored for an extended period of time, it must be operated at least once a year for a minimum of 60 minutes. It is because the electrolytic capacitors present in the device are likely to deteriorate over a long period of storage. The product must be programmed before commissioning to make sure that the specified functions of an application are performed by the motor.