Product Description

The HCS01.1E-W0028-A-03-A-CC-EC-ET-L3-NN-FW is one of the most efficient industrial devices manufactured by Rexroth Indramat, it is an electrical converter produced to control the operation of industrial motors by ensuring that the input electrical current, voltage, and frequency supplied to the industrial motor are adjusted to generate an output corresponding to pre-determined configuration parameters. This electric motor is designed according to internationally acceptable standards, its housing unit contains a high metal content, and allows the controller to maintain a high operational efficiency even when it is being used in industrial conditions considered too harsh for convectional industrial machines. The HCS01.1E-W0028-A-03-A-CC-EC-ET-L3-NN-FW electrical converter can be used with most industrial motor designs including the synchronous, induction linear, and asynchronous motor designs.

The HCS01.1E-W0028-A-03-A-CC-EC-ET-L3-NN-FW electrical converter does not generate a high amount of noise during operation, this makes it possible for industrial operators to use the converter without the risk of environmental disturbance. The HCS01.1E-W0028-A-03-A-CC-EC-ET-L3-NN-FW also features an internal air blower which helps to keep the heat generated in the converter within a permissible range through the process of forced cooling, to aid this temperature regulation process, the converter should be installed into a position that allows for the easy movement of cool air in and around the device.

The HCS01.1E-W0028-A-03-A-CC-EC-ET-L3-NN-FW electrical converter is also designed to carry out integrated brake measuring and monitoring, in the case of fatal errors, it can independently initiate a shut-down reaction to prevent industrial accidents or electrical damage to the servo system. The sophisticated design of this electrical converter allows it to maintain an operational efficiency of about 95 percent during operation. Although the converter is not supplied with a firmware module, it can be independently ordered as a separate unit by the operator.