Product Description

Bosch Rexroth's drive controllers, servo drives, brake resistors, servo amplifiers, universal cards, synchronous motors, electronic amplifier cards, and frequency converters demonstrate the company's commitment to customer satisfaction. These gadgets are often utilized in several automated industries.

The HCS01.1E-W0028-A-03-A-CC-EC-EC-L4-NN-FW model's advanced control section and compact size (70 mm x 196 mm x 268 mm) permit rapid assembly and accurate positioning. This HCS01.1 drive controller was designed by the manufacturer to operate between 0 and +40 degrees Celsius. The G1 setting is required for the model's built-in blower/fan to function properly. It is necessary to remove dust and other impurities from the entering air. This model includes a module for the SERCOS master cross-communication module and has a maximum current rating of 28 A. The communication module is necessary for transmitting parameters to the drive controller. Master and driver often communicate parameter information. This HCS01.1 drive controller has an output current rating of 11.5 A, weighs 2.10 kilos, and must be transported between -25 and +75 degrees Celsius.

The model HCS01.1E-W0028-A-03-A-CC-EC-EC-L4-NN-FW has an insulating resistance of 10 Mohm and requires a mains connection voltage between 200 and 500 volts, with a 10% tolerance. Interfaces 1 and 2 of the model are multi encoder, but interface 3 is an STO (Safe Torque Off) and SBC (Safe Brake Control). This device's input current rating is 10 A, and its IP 20 rating gives protection against particles. Nevertheless, it has to be stored in a control cabinet that has adequate environmental protection. To ensure that the model (HCS01.1E-W0028-A-03-A-CC-EC-EC-L4-NN-FW) has adequate airflow throughout, there should be a gap of air measuring 90 millimeters between the bottom and the top of the structure.