Product Description

The HCS01.1E-W0018-A-03-A-ET-EC-EM-L3-NN-FW drive controller from Bosch Rexroth and a motor work in unison as a drive system. This controller can be used with most third-party motors just like the manufacturer’s motor. The product is deployed in automated assembly and handling, pick-and-place, logistics and palletizing systems. This device incorporates scalable signal processing and firmware. The unit supports the free configuration of its digital inputs or outputs. Its multi-encoder interface supports all standard encoders. The controller features an 18A maximum current rating. This product can cause injury or damage if an inappropriate machine is used for installation.

The device should never undergo any structural change. This unit is to be installed as per the instructions given in its documentation. It operates with derated data at a temperature ranging between 40°C and 55°C. The controller must undergo commissioning before its programming takes place. This product triggers interference of high frequency in residential areas. The device installation, operation as well as maintenance have to be undertaken only by qualified personnel. This unit has high electric voltage when used inappropriately. It has more than 3.5mA discharge current. The HCS01.1E-W0018-A-03-A-ET-EC-EM-L3-NN-FW drive controller with a warranty tag of one year is sent globally to wherever it is required.

This product needs a disconnection from the mains before accessing its electrical parts with a voltage higher than 50V. The device can work with a third-party rotary or linear motor. This unit can control the third-party motor only if it satisfies the voltage load. It supports Ethernet-based communication with several protocols. The controller can be operated for single-axis and multiple-axis drive and control tasks. This product features an ambient setup elevation of 1000m over sea level. The device comprises guards and covers that must be installed before it is turned on. The unit is fitted with a dedicated interface to support encoder emulation.