HCS01.1E-W0018-A-03 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat HCS01.1E-W0018-A-03 is part of the HCS IndraDrive Controllers series and is a drive controller designed with an internal air cooling method using an integrated blower. This HCS01 line controller features a peak device current of 18 Amps, a mains voltage range of 3 x AC 200 to 500 Volts, and an IP20 protection rating.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The HCS01.1E-W0018-A-03 is a compact drive controller produced by Bosch Rexroth Indramat. It regulates torque, speed, and position for synchronous or asynchronous servo motors in automated machinery, providing coordinated motor control and diagnostic functions from a single-axis module. By combining power electronics, control functions, and communication in one enclosure, the unit supports decentralized layouts and helps reduce cabinet space and wiring. This makes it suitable for packaging equipment, handling axes, and other machines that need repeatable motion in a compact installation. The integrated control structure also keeps power conversion and axis control in the same housing, which simplifies overall system layout.
This controller can deliver a peak output of 18 A, allowing short-term acceleration current for indexing tables, pick-and-place actuators, and other dynamic loads. Internal thermal management uses internal air cooling through an integrated blower, so no external heat sink or coolant loop is required. The mains connection accepts a three-phase supply of 200 to 500 V AC with a ±10% tolerance, which supports use with different plant power systems. An IP20 housing is intended for installation inside a protected electrical cabinet where direct dust or liquid exposure is not expected. The line code HCS01 identifies its placement within this drive controller platform.
The power stage is classified as infeeding / fed, so the controller can return regenerative energy to the DC bus or draw it when required in shared-supply systems. In multi-axis arrangements, this allows energy from decelerating axes to be used elsewhere on the same bus instead of being wasted as heat. The unit is Design version 1, which identifies this build within the product line. It is part of the HCS IndraDrive Controllers series and is suited to small and medium servo axes that need coordinated motion with a compact controller footprint. This layout suits compact servo installations where shared DC-bus operation is preferred.
Frequently Asked Questions about HCS01.1E-W0018-A-03:
Q: What cooling method is used in the HCS01.1E-W0018-A-03 controller?
A: The HCS01.1E-W0018-A-03 drive controller is cooled using internal air circulation provided by an integrated blower.
Q: What is the device peak current of the HCS01.1E-W0018-A-03 drive controller?
A: This controller has a peak current handling capacity of 18 A for demanding load cycles.
Q: What level of ingress protection does the HCS01.1E-W0018-A-03 provide?
A: The HCS01.1E-W0018-A-03 is protected to an IP20 rating, offering limited resistance to dust and no protection against water.
Q: What is the mains voltage range supported by the HCS01.1E-W0018-A-03?
A: This model accepts a mains voltage input of 3-phase AC 200 to 500 V, with a ±10% tolerance.
Q: Which line series does the HCS01.1E-W0018-A-03 controller belong to?
A: The HCS01.1E-W0018-A-03 belongs to the HCS01 line series of IndraDrive Controllers from Bosch Rexroth Indramat.
