Product Description

The Bosch HCS01.1E-W0018-A-02-B-ET-EC-PB-NN-NN-FW is an AC drive controller. It is used for motor control in industrial applications. The controller is designed for three-phase AC input at 110 to 230 Volts AC. Peak current output that the controller can deliver is 18 Amps. Full rated output is only available if the ambient temperature is between 0 and 40 degrees Celsius and if the site elevation is between 0 and 1000 meters. The controller output derates if either the temperature or the site elevation go outside recommended limits. The output derating increases if both the temperature and site elevation exceed recommended limits at the same time. Therefore operators must ensure that operating conditions match those specified by Bosch. In addition to output derating, use of the controller under non-specified operating conditions can lead to component malfunction.

The warranty for Bosch products is voided if the products are used under inappropriate operating conditions or if they are used for non-specified applications. Bosch provides a user manual with each of its industrial products. The manual contains relevant information related to product use and safety. Operators must ensure that personnel working on the HCS01.1E-W0018-A-02-B-ET-EC-PB-NN-NN-FW have read and understood safety and operating instructions in the user manual. The controller supports several integrated and optional features. A hardware module with Profibus support is installed on the unit. The integrated communication interface on the unit is Multi-Ethernet. The controller also features a multi-encoder interface that allows operators to use the controller with a wide range for Bosch servo motors.  The controllers cools via forced-air cooling. The ingress protection rating of the housing is IP20. Bosch supplies a standard control panel with the HCS01.1E-W0018-A-02-B-ET-EC-PB-NN-NN-FW controller.