Product Description

The HCS01.1E-W0013-A-02-E-S3-EC-NN-NN-NN-FW drive controller from Bosch Rexroth works with the manufacturers and third-party motors. This drive controller is a good choice for use in general automation systems. The product comprises a compact construction. This device belongs to the HCS product group of such offerings. The unit primarily comprises a control section and a power section. It uses a SERCOS III / EtherCAT module for command communication. The controller comprises an engineering port. This product has a width of 50mm and a height of 215mm. The device comprises a HAP01 control panel with a single-line display and four keys.

The controller may cause personal injury if it is used in an inappropriate machine. This unit has hot housing during and soon after operation. It is designed for operation in only industrial environments. The product helps to control and monitor the operation of an electric motor. This device features Category C3 components in accordance with IEC 61800-3 specifications. The unit must neither be installed nor operated without reading the associated documentation. It has to be commissioned only after making sure that the machine in which the installation is done is in compliance with national regulations. This HCS01.1E-W0013-A-02-E-S3-EC-NN-NN-NN-FW controller has a one-year warranty period.

The product operation, maintenance and repair must be undertaken only by qualified personnel. This device features live electrical connection points during operation. The unit might depict dangerous movements if the motor has a faulty control. It cannot be operated if the emergency stop switch is not working. The controller controls the holding brake of the associated motor. This product should neither be crushed nor jammed. The device is free of any harmful materials that can harm the environment. This unit is meant to be used with only a third-party motor that satisfies the voltage loads. This controller is shipped to any global destination.