Product Description

The HCS01.1E-W0013-A-02-A-CC-EC-EM-NN-NN-FW is an electrical converter designed by Rexroth Indramat to control the operation of industrial and synchronous motors used in industrial operations. This industrial converter is designed to meet the American and European quality standards, it features a unique compact design and a housing unit that provides it with protection according to the IP20 protection class. Under ideal operating conditions, the HCS01.1E-W0013-A-02-A-CC-EC-EM-NN-NN-FW industrial converter operates at an efficiency of about 95 per cent, this high operational efficiency makes it the preferred choice for industrial operators that require accurate motor control over a broad motor speed range. This electrical converter features an advanced control panel made up of a display unit and four pressure-sensitive keys; this control panel provides the end user with a user-friendly means of controlling the operation of the converter in real-time.

The HCS01.1E-W0013-A-02-A-CC-EC-EM-NN-NN-FW electrical converter is not supplied with a firmware module; however, this can be ordered by the end-user as a separate unit depending on the industrial application the converter is required for. The configuration, installation, and general handling of this electrical converter is straightforward; however, it is still important to ensure the converter is only handled by highly trained industrial engineers according to pre-determined configurational parameters. The HCS01.1E-W0013-A-02-A-CC-EC-EM-NN-NN-FW electrical converter is designed with an internal air blower which helps to keep the operating temperature within a permissible range via forced ventilation.

The HCS01.1E-W0013-A-02-A-CC-EC-EM-NN-NN-FW electrical converter features a multi-encoder interface; this makes it very compatible with a wide range of industrial motor encoder designs, including the MSM, MS2N, EnDat2.1, EnDat2.2 and the SSI encoder design. Also, this converter should not be installed at an height that exceeds 1000 meters above sea level as this can cause the build up of heat at a rate that can be managed by the temperature regulation system of the converter.