Product Description

The Bosch Rexroth HCS01.1E-W0009-A-02-A-CC-ET-L4-NN-FW is an excellent drive controller that features multi-Ethernet and STO and SBC options. The unit has an infeed power supply. It depicts an IP 20 degree of protection. There are three type plates in the product, one attached to the device, one to the firmware, and one to the control panel. The type plate helps in the identification of the components. It also carries technical details. The unit must be mounted in a control cabinet. It should be protected against conductive dirt contamination within the cabinet by mounting it with a degree of protection of IP54 according to IEC529. The firmware of the HCS 01 drive controller must be ordered separately. The rated installation altitude of the device is 1000 meters amsl. Suitable equipment should be used for mounting and transporting the product. Appropriate measures must be taken to prevent jamming and crushing of the components. The personnel working in the vicinity of the drive controller must use appropriate protective gear including safety goggles, a hard hat, safety gloves, and safety shoes. Standing under hanging loads must be avoided. If there is any spilled liquid on the floor near the device, it should be immediately cleaned up to prevent the risk of falling. The drive controller must be operated under the specified assembly and installation conditions, by properly observing the ambient conditions mentioned in the product manual. The product features an ADVANCED control section design. It should be noted that some components of the compact converter contain electrolytic capacitors, which are prone to deterioration during storage. So, when the device is stored for a long period, it is crucial to run it once a year for a minimum of one hour.