Product Description

The HCS01.1E-W0009-A-02-A-CC-EC-EC-L4-NN-FW drive controller by Bosch Rexroth essentially comprises a control section as well as a power section as its major parts. This drive controller features a series code 01. The product works with motors from the same manufacturer and third-party motors. This device might need additional sensors and actuators to control and monitor it. The unit is largely used in palletizing, logistics as well as pick-and-place systems. It houses two multi-encoder interfaces for all standard encoders. This controller features analog and digital inputs as well as outputs. The product buffers the data of an MSM encoder using a battery box near the motor.

This device supports Safe Torque Off and Safe Brake Control safety technologies. The unit has a 9A maximum current rating. It supports single-phase operation. The controller causes personnel injury or property damage due to improper applications or installations. This product has to be put to use only after confirming that the prerequisites for its appropriate use are met. The device cannot be mounted or connected with components that are not approved by its manufacturer. This unit along with the motor forms an essential part of a drive system. Its components have to be utilized only in the manner that is defined as appropriate. This drive controller comprises a one-year warranty.

The product is UL Listed and CSA Certified. This device has a height of 215mm. The unit portrays high electric voltage because of an incorrect connection. Its components may have dangerous conducting voltages of over 50V during the operation period. The product needs to be fitted with its guards and covers before it is turned on. This device should have a permanent connection of its equipment grounding conductor to the mains power supply at all times. The unit is likely to portray dangerous movements if the motor has the wrong input of parameters before commissioning. This drive controller can be dispatched to any global destination.