Product Description

 Bosch Rexroth provides trustworthy and cost-effective solutions to automation difficulties. Among the offered items are drive controllers, synchronous servo motors, digital axis controllers, frequency controllers, and power supply modules.

The HCS01.1E-W0003-A-02-A-ET-EC-NN-L3-NN-FW model has an output current rating of 1.1 A, sturdy construction, and a lightweight design. With a maximum input current of 3 A, the model functions at peak efficiency. G1 is the permitted mounting position for the HCS01.1 drive controller, and it houses the power supply unit. The frequency of the feed current should vary between 50 and 60 hertz. When put in a group, there should be enough space at the top and bottom for air circulation. The model must be kept away from devices that emit electromagnetic radiation. Before activation, the model must be configured to meet the motor's application-specific specifications. Interface 1 of the model is a Multi encoder interface and can only be utilized in accordance with the installation and operating criteria outlined in the user manual. The HCS01.1 drive controller includes a multi-ethernet connection module and is compatible only with the peripherals and components listed in the specification. Interface 3 of the model is STO (safe torque off) and is built and manufactured using cutting-edge hardware and modern technologies for maximum efficiency.

The model HCS01.1E-W0003-A-02-A-ET-EC-NN-L3-NN-FW must be powered by a certain three-phase AC 110-230 V power supply module (10 percent tolerance). The model has an insulation resistance of 10 Mohms at 500 V DC and weighs 1.30 kilos. The approved IP20 drive controller should not be subjected to extreme heat. The controller (HCS01.1E-W0003-A-02-A-ET-EC-NN-L3-NN-FW) is meant to be cooled by ambient air. Air is circulated by a fan or blower to remove excess heat from the control unit.