Product Description:

The HCQ02.1E-W0025-A-03-B-L8-1S-D1-D1-NN-FW is built by Bosch Rexroth Indramat for the HCQ Micro Controls series. It contains an embedded PC based on the LX 800 platform, and its control section uses the Basic design 1 layout. The unit belongs to line 02 of the HCQ Micro Control group. An integrated blower moves internal air to cool the electronics during operation. A SERCOS III master supports drive network communication, and two DEA40.1 option cards expand axis capacity for coordinated motion tasks. The power stage uses a feeding topology suited to centralized DC systems.

The enclosure measures 320 mm wide, 455 mm high, and 191 mm deep, and the unit weighs 11.70 kg for cabinet installation. This size allows it to fit standard industrial cabinets without requiring excessive panel depth. For mains connection, it accepts a three-phase supply of 3 x AC 200…500 V at 50…60 Hz with a voltage tolerance of ±10%. Under nominal conditions, the unit draws 44.0 A and can deliver 25 kW of regulated power to downstream inverters, with output adjustable from 0 to 500 V AC per phase. The housing has an IP 20 rating, so the controller must be installed inside a closed cabinet, and five encoder interfaces plus four probe ports are available on the front panel for direct sensor connection.

The controller provides 32 digital inputs and 16 digital outputs, which can reduce the need for external I/O hardware. Circuit protection follows a 60 A class J branch fuse guideline, and the unit has a UL short-circuit withstand rating of 42,000 A RMS for connection to high-capacity mains panels. The SERCOS III master coordinates communication with the connected drive network so I/O events stay aligned with motion commands. This arrangement supports synchronized responses across connected axes and local I/O channels. That timing helps axes maintain precise phase relationships even when the controller is operating at full electrical load.