Product Description:

The HCQ02.1E-W0025-A-03-B-L8-1N-D1-D1-NN-FW is a power supply module produced by Bosch Rexroth Indramat within the HCQ Micro Controls series. It delivers regulated three-phase power to connected drive sections while coordinating motion and process tasks through an embedded PC based on the LX 800 platform. In an automation cabinet, the unit conditions incoming mains power for downstream inverters or servo controllers and also provides an interface for diagnostic, control, and network data. Its combined power and control functions make it suitable for compact machine architectures that place the supply and processing hardware in the same cabinet section.

This unit is rated for 25 kW of continuous power and accepts an input of 3 x AC 200–500 V, allowing connection to common industrial distribution levels without a transformer. This range supports facilities with different regional supply standards and allows the module to be used across multiple machine platforms. At full load, maximum input current reaches 44.0 A, and the internal rectifier operates across 50–60 Hz line frequency. The mains terminals tolerate a variation of ±10% from nominal voltage before regulation margins are reduced. Branch protection uses a 60 A Class J fuse, which matches the converter’s wiring capacity and limits let-through energy during upstream faults.

The power section can provide an output of 3 x AC 0–500 V for the attached drives and can withstand a prospective fault current of 42000 A rms when used with UL-listed equipment. The enclosure is rated IP20, so cabinet mounting is required to protect the unit from contact and contamination. Cooling is handled by an integrated blower, and the housing measures 320 mm wide, 455 mm high, and 191 mm deep. The unit weighs 11.70 kg, uses a Basic control section with design 1 and line 02, and has two populated DEA40.1 option slots for additional interface functions.