Product Description

The FVCA01.1-30K0-3P4-MDA-LP-P001-01V01 Bosch Rexroth frequency converter should be installed and operated only after reading the associated documentation. The converter may cause property damage if it is installed improperly. The product comes along with an integrated brake unit, an instruction manual, an operating panel, and associated firmware. The three-phase device has to be always fitted inside a control cabinet. This unit encompasses a climatic category of 2K3 as per IEC 721 specifications. Its components may get damaged when stored for a long period without use. The converter has an overload capacity of 150% of the rated current for a minute.

The product comprises high startup torque. The device portrays an adjustable pulse width modulation of 1kHz to 15kHz. The electrical connection points of its components must never be touched when the power is switched ON. The unit does not have a side ventilation hole and therefore supports parallel mounting with no distance at all. The heat loss of this converter is approximately 5% of its rated power during operation. This product is intended to be mounted using four screws. The device has two relay outputs and two open collector outputs. We can send the frequency converter to your desired destination through our reputed delivery network.

This converter should at all times have the power supply connected through its L1, L2, and L3 main power supply terminals. There should be a fuse between the three-phase AC input power supply and the terminals of the main power supply. The product may fail or get damaged if the radio noise filter, surge suppressor, or power capacitor is attached to its outside. The device must utilize four-core cables to connect to the PE, U, V, and W terminals of the motor. Its GND and SC terminals are common terminals for analog signals and switch values respectively. The frequency converter comes with a Wake Industrial one-year warranty.