Product Description

The FECP02.1-45K0-3P400-A-BN-MODB-01V01 frequency converter is supposed to make use of insulated crimp terminals for connecting its conductors and terminals. This Bosch Rexroth converter may have a voltage drop leading to reduced motor torque output if the wire used to connect it with the motor is very long. The product must be connected to the motor at its PE, U, V as well as W terminals using four-core cables. The cables of the device may cause incorrect operation and get disconnected if they are not connected properly. The fuse and power cables of the unit are sized as per EN 60204-1 specifications. The converter uses a fuse with a 160A nominal current rating.

This product encompasses a freely definable V/f curve. The device incorporates connectors and cables with UL marking for wiring its terminal blocks. This unit has a 10V analog input that acts as a power supply terminal for speed commands. Its open collector outputs have multiple functions. The operating panel of the converter encompasses a display and multiple keys. The Run command on the panel can be used to start the frequency converter. The product has to be put to use at least once a year with the power ON for an hour when it is stored for a long time.

The components of this converter have to be free of icing and moisture condensation during storage and transport. The device comprises an overload capability of 120% of the rated current for 60 seconds. It is capable of rendering precise motor speed control. The unit has one encoder input for speed feedback. The converter installation is at all times meant to be performed only by qualified and trained personnel. The product operation should take place only if the application meets the required national EMC standards. This FECP02.1-45K0-3P400-A-BN-MODB-01V01 converter has a valid warranty for one year and is delivered through a reputed logistics team.