Product Description

The Bosch Rexroth FECP01.1-220K-3P660-A-BN-NNNN-01V01 frequency converter features three phases. The product is meant to be operated between -10°C and 40°C with rated data. The output voltage of this device must at no time be more than its input voltage. The unit has 120% of the rated current for 1 minute. It has two work modes if the frequency command is lesser than the set lower frequency value. The converter has increased slip and load when it drives an asynchronous motor. The product uses the PI adjustment function to detect the sensor feedback of its control. The device may stop operating due to faults encountered.

The frequency converter must comprise sufficient clearance distance above and below it inside the control cabinet in which it is installed. The product is integrated with discharging devices that have a voltage of less than 50V within the specified discharge time. The unit also has capacitors in its DC bus that function as energy stores. The firmware has a version code of 01 and a release status code of 01. The converter has a slave address setting of 01H. The device comes with the capability of recording the reasons why the last four faults occurred and also displaying these reasons after the faults are reset. We can send the product to any address of your choice irrespective of the country you live in.

The converter must always be inspected for loose parts or deformation before it is put to use. This unit has an input frequency ranging between 50Hz and 60Hz. This frequency has a tolerance limit of +/5Hz. The product must always be de-energized and its power switch should be secured against unauthorized or unintentional re-energization before working on its live parts. The device must be worked on only after half an hour of turning the supply voltage OFF. This frequency converter is supported by a year’s Wake Industrial warranty.