VFC3610-11K0-3P4-MNA-7P-NNNNN-NNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
The VFC3610-11K0-3P4-MNA-7P-NNNNN-NNNN is a frequency converter produced by Bosch Rexroth Indramat and is part of the FCS Frequency Converters series. It delivers a heavy-duty power of 11 kW and a rated continuous current of 24.3 Amps, and features 5 digital inputs, 2 analog inputs, and 2 extension slots. The unit supports Modbus RTU communication protocol, has a protection rating of IP20, and weighs 5.0 kilograms.
Internal Product Review
The VFC3610-11K0-3P4-MNA-7P-NNNNN-NNNN is an FCS frequency converter with 11 kW heavy-duty power and 24.3 A heavy-duty current. Modbus RTU communication and an IP20 protection class support straightforward integration in controlled industrial panels. A strong choice for industrial drive applications, especially where 3P400 V input capability is required.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The VFC3610-11K0-3P4-MNA-7P-NNNNN-NNNN is a frequency converter produced by Bosch Rexroth Indramat for the FCS Frequency Converters series. It serves as a variable-speed drive interface for AC motor control in automated machinery and process lines. The unit accepts three-phase mains power and modulates output frequency to match motor requirements. This allows connected equipment to run at controlled speeds instead of fixed line frequency.
The unit draws power from a 3P400 V supply and can deliver a heavy-duty line current of 24.3 A for applications that demand sustained torque. Supported motor rating is 11 kW, placing the converter in a mid-range power class for pumps, fans, and conveyors. Protection is limited to the enclosure's IP20 rating, so installation inside a cabinet is required. The control section includes 5 digital inputs, two analog input channels, and two extension slots for optional I/O or fieldbus cards. Pulse commands are accepted through the input channel up to 50 kHz, while the built-in serial port supports Modbus RTU for networked parameter access. A 24 VDC, 100 mA auxiliary supply powers external sensors, and the front 7-segment LED panel provides local status indication and parameter editing. No EMC filter is integrated, so external suppression components may be required to meet emission limits.
Pulse feedback to higher-level controls is available through a 32 kHz output channel, and switching functions are handled by a 30 VDC / 50 mA digital output and a 250 VAC / 3 A relay. These outputs can be used for simple status signaling to external control circuits. The housing measures 283 mm in height, 150 mm in width, and 233 mm in depth, allowing installation in standard 300-mm-deep panels. Net mass is 5.0 kg.
