FCS01.1E-W0019-A-02-NNBV Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911311060
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
36 Seconds
The Bosch Rexroth Indramat FCS01.1E-W0019-A-02-NNBV is part of the FCS Frequency Converters series and offers a rated capacity of 2.2 kW with a power supply configuration of feeding. It features air cooling through an integrated blower, supports an input voltage of 1 x AC 200 to 240 V with ±10% tolerance, and has a maximum current of 19 A. This frequency converter allows a max output frequency of 400 Hz and provides IP20 degree of protection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FCS01.1E-W0019-A-02-NNBV frequency converter is produced by Bosch Rexroth Indramat within the FCS Frequency Converters series. The device is a variable-speed controller that modulates the electrical frequency supplied to an AC motor so industrial machinery can match torque and speed demands. It is intended for panel-mounted motor control in general industrial equipment where adjustable speed is required. By varying motor speed electronically, it can support smooth acceleration, controlled deceleration, and stable operation under changing load conditions.
It requires a single-phase input of 1 × AC 200–240 V and tolerates variations of up to ±10% around that level. The converter delivers a rated motor output of 2.2 kW while drawing as much as 19 A in continuous service. Its power section creates a DC link at about 1.41 times the mains voltage so the intermediate circuit can support stable vector control. Output frequency is adjustable from zero to 400 Hz, enabling operation of standard or high-speed motors. Carrier frequency starts at 3 kHz, and the unit accepts supply frequencies from 47 Hz to 63 Hz. Cooling is handled by an internal blower, and the unit includes an integrated brake transistor with a dedicated 24 V DC control supply. A line-fed supply topology allows the converter to operate directly from standard utility power.
For dynamic braking, the converter can switch an external resistor and dissipate a continuous 0.1 kW of braking energy during deceleration. At the highest switching setting of 16 kHz, temperature is still controlled by the forced-air path inside the enclosure. Short events may draw up to 200% of nominal current for five seconds when brief overload capacity is needed. The enclosure is rated IP20, which suits installation inside a protected control cabinet. This arrangement helps absorb regenerated energy from decelerating loads without returning it to the supply line. The panel must provide protection against accidental contact because the housing is not sealed for open-machine mounting.
Frequently Asked Questions about FCS01.1E-W0019-A-02-NNBV:
Q: What is the maximum output frequency supported by the FCS01.1E-W0019-A-02-NNBV?
A: The FCS01.1E-W0019-A-02-NNBV supports a maximum output frequency of 400 Hz.
Q: What mains connecting voltage range does the FCS01.1E-W0019-A-02-NNBV require?
A: This model operates with a mains connection voltage range of 1 x AC 200 to 240 V.
Q: How is the FCS01.1E-W0019-A-02-NNBV frequency converter cooled?
A: Cooling is achieved using internal air circulation via an integrated blower.
Q: What is the maximum current rating for the FCS01.1E-W0019-A-02-NNBV?
A: The FCS01.1E-W0019-A-02-NNBV has a maximum current rating of 19 A.
Q: What is the degree of protection for the FCS01.1E-W0019-A-02-NNBV frequency converter?
A: This device offers degree of protection rated at IP20.
