FCS01.1E-W0015-A-02-NNBV Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911311059
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
29 Seconds
The Bosch Rexroth Indramat FCS01.1E-W0015-A-02-NNBV is part of the FCS Frequency Converters series and provides a rated capacity of 1.5 kW with a maximum current of 15 Amps. It operates with a single or three-phase AC supply at 200 to 240 Volts, features IP20 protection, and uses internal air cooling with an integrated blower. The frequency converter supports an external braking resistor, includes an integrated brake transistor, and offers a maximum output frequency of 400 Hz.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FCS01.1E-W0015-A-02-NNBV is a frequency converter produced by Bosch Rexroth Indramat for the FCS Frequency Converters series. Classified as design version 1, the unit is installed in automation panels to create adjustable AC waveforms for induction or synchronous motors, allowing precise torque and speed control without mechanical gear changes or stepped pulley adjustments. It accepts a single-phase or three-phase mains feed and, through its internal power electronics, links the supply to the DC bus so downstream axes can share regenerated energy during deceleration.
This converter delivers a rated capacity of 1.5 kW and can supply up to 15 A of output current to the motor. The input side operates on 1 x AC 200 to 240 V with a ±10 % voltage tolerance window, and the DC bus is stabilized at 400 V through the integrated rectifier. The converter uses a feeding power-supply configuration and an active DC-link connection, so excess energy can flow to the common bus where an external braking resistor and an internal brake transistor handle peak levels. The device supports both single-phase and three-phase wiring, reproduces a linear V/f curve, and sets carrier frequencies up to 16 kHz. Motor speed is regulated by synthesized output frequencies that reach 400 Hz, enabling high-speed spindles while maintaining constant flux. Electronic protection supervises overcurrent and undervoltage conditions.
For extended service, the inverter tolerates a continuous overload of 150 %/60 s and a short-term surge of 200 %/5 s, enabling acceleration of heavy loads without tripping. Internally directed air from the integrated blower removes 0.1 kW of braking heat and helps keep semiconductor temperatures stable during repeated acceleration and deceleration cycles. The degree of protection is IP20, so cabinet installation is required. The unit uses Line 1 logic, includes a 24 V control supply for the logic boards, provides external braking-resistance terminals, and relies on cooling air entering through the cabinet for overall airflow.
Frequently Asked Questions about FCS01.1E-W0015-A-02-NNBV:
Q: What is the maximum output current of the FCS01.1E-W0015-A-02-NNBV frequency converter?
A: The FCS01.1E-W0015-A-02-NNBV frequency converter is rated for a maximum current of 15 A during operation.
Q: What kind of input phases does the FCS01.1E-W0015-A-02-NNBV model support?
A: This frequency converter supports both single-phase and three-phase AC input, offering flexible installation options.
Q: How is the FCS01.1E-W0015-A-02-NNBV frequency converter cooled during use?
A: The cooling method for this converter uses internal air circulation via an integrated blower.
Q: Does the FCS01.1E-W0015-A-02-NNBV frequency converter use internal or external braking resistance?
A: External braking resistance is required for this model as internal braking resistors are not included.
Q: What is the degree of protection for the FCS01.1E-W0015-A-02-NNBV frequency converter?
A: This converter features a degree of protection rated at IP20, meaning it is protected against solid objects greater than 12 mm but not water.
