Product Description

The EFC5610-3K00-3P4-MDA-7P-NNNNN-NNNN frequency converter manufactured by Bosch Rexroth performs several calculations in sensorless vector mode to enhance the low-speed torque. The converter features an LED display that depicts “tUnE” during the auto-tuning process. The product is designed for operation at a maximum altitude of 1,000m over sea level. The device has a product line code of 02. The unit functions with derated data if the operating temperature is over 45°C. The unit is meant to always be installed only in the vertical orientation. It can be placed above another converter of the same type with an air guide between the two converters.

The frequency converter is intended to be fitted inside a control cabinet. This converter has a frame size of D. It supports mounting on a DIN rail apart from a wall. The cold plate of this product has a thermal resistance of 0.098°C/W for its cold plate. The device is meant to be connected to the motor using shielded cables. The unit makes use of a Class J 20A fuse. It should be turned OFF before stripping the insulation of its control cables. The product features three mains supply input terminals designated as L1, L2 and L3. The converter permits a parallel connection to a DC bus by using a DC choke.

The product may get damaged if the connector is plugged or unplugged without switching OFF the power supply. The device features a standard control section. It is possible to operate the converter in a residential environment if an external EMC filter is used. The unit complies with Category C3 requirements of EMC standards. This product is equipped with an operator panel that comprises the LED display and buttons. The device is programmed by means of these buttons. The converter is eligible for global dispatch with its one-year warranty backup.