Product Description

Bosch Rexroth is a well-known manufacturer and developer of industrial automation equipment. The company offers a series of high-quality and efficient frequency converters, motor drivers, and controllers to its customers.

The EFC5610-1K50-3P4-MDA-7P-00002-L1NN model is an IED 61800-3 (Second Environment C3) EMC compliance driver. The motor driver can deliver a power of 1.5 kW while operating on three-phase AC 380 – 480 V power supply through, with an input of 4.8 A rated current. The three phases of the power supply should be connected with the L1, L2, and L3 terminals of the converter. The EFC frequency converter operates at a frequency of 50/60 Hz with ±5% tolerance. The motor driver comes with Safe Torque-off (STO) feature to disable Variable Frequency Drive (VFD) with no current or voltage going to the motor. The weight of the controller is 1.9 kg and should be mounted vertically while maintaining the air gap (if installed in a group). The dimensions are 95 x 170 x 206 mm. The recommended altitude is <1000m above sea level. The output voltage frequency of the EFC5610 converter is 0 – 400 Hz. The model is equipped with Dynamic Braking (DBr) system and can bear overload up to 150% for about 60 seconds. The EFC frequency converter uses RS485 interference with Modbus protocol for effective communication between the electronic devices.

The EFC5610-1K50-3P4-MDA-7P-00002-L1NN frequency converter comes with IP20 category protection which only allows particle size below 12.5 mm, but does not protect from the liquid. The module is can operate under 90% relative humidity. The Class-3 EMC filter in model EFC5610 helps to remove high-frequency interference signals. The EFC5610-1K50-3P4-MDA-7P-00002-L1NN frequency controller is available at the Wake Industrial. Order your product today and receive it at your address. This unit can be shipped globally with a one-year warranty period from Wake Industrial.