Product Description

The Bosch Rexroth EFC5610-0K75-1P2-MDB-7P-NNNNN-L1NN is a frequency converter. It comes with 7 segment display with potentiometer. The converter display shows mode settings and operating state of the frequency converter. Buttons are also available on the front panel which allow programing of the converter. The EFC5610-0K75-1P2-MDB-7P-NNNNN-L1NN can also be ordered with optional dust cover. LED indictors on the front panel of the converter provide a visual indication of device status and presence of any fault conditions. The EFC5610-0K75-1P2-MDB-7P-NNNNN-L1NN is available in a IP 20 rated cold plate enclosure which must be mounted in vertical orientation. The converter can only be wall mounted and cannot be mounted on a DIN rail. A minimum spacing of 125 millimeters should be provided above and below the mounted converter to allow for smooth air flow which is required for cooling of the convection cooled frequency converter.

The rated heat dissipation of the converter is 70 Watts or 256 BTU per hour. The rated cold plate loss is 35 Watts. Approximate weight of the EFC5610-0K75-1P2-MDB-7P-NNNNN-L1NN is 1.5 kilogram. Dimensions of the converter are: 166 millimeters height, 95 millimeters width and 167 millimeters depth. Output power rating of the EFC5610-0K75-1P2-MDB-7P-NNNNN-  L1NN is 750 Watts. The input rating is 200 Volts AC (single-phase, 50 / 60 Hertz). Rated output frequency range for the EFC5610-0K75-1P2-MDB-7P-NNNNN-L1NN is 0 to 400 Hertz. Range of carrier frequencies is from 1 to 15 kilohertz. Integrated converter features include safe torque off safety feature, SVC motor control, flex control with standard I/O, serial interface, Modbus interface and EMC filter. Supported acceleration and deceleration modes include linear and S-curve. Also supported are multi-speed control, simple PLC control and PID control. This unit can be shipped globally with a one-year warranty period from Wake Industrial.