Product Description

The EFC3610-3K00-3P4-MDA-7P-NNNNN-NNNN does not have an internal contactor and is powered by a power supply of 24 VDC with a maximum output current of 100mA. The frequency converter manufactured by Bosch Rexroth is turned on or off through a control panel that contains a potentiometer for setting the output frequency as required by the user. By default, the frequency converter monitoring parameter displays the output frequency in run status and setting frequency when not in operation. The default settings are based on standard applications with normal motors but can be altered to meet the application requirements. After powering on the converter, confirm that no error message is displayed on the set frequency and the monitoring parameter is the same as the actual operational situation. Always use shielded cables when connecting the frequency converter to a servo motor.

The EFC3610-3K00-3P4-MDA-7P-NNNNN-NNNN can be operated in demanding operations through the SVC control. When running the SVC control function, it is necessary to auto-tune the frequency converter to meet high application demands. There are two auto-tuning modes available; rotational auto-tuning and static auto-tuning. Rotational auto-tuning is used for SVC control, while static auto-tuning is used in V/f control of the frequency converter. Before switching to auto-tuning mode, check if the frequency converter power rating is close to that of the motor and the PMSM motor is not overheated or in operation. When using a frequency converter with a dust cover, install a LED panel to perform the above functions.

The EFC3610-3K00-3P4-MDA-7P-NNNNN-NNNN is designed for mounting into a control cabinet IP 20 protection class. The frequency converter should be operated at ambient temperatures ranging from -10°C to 45 °C in relative humidity without any condensation. This unit can be shipped globally with a one-year warranty period from Wake Industrial.