Product Description

The EFC3610-2K20-1P2-MDA-NN-NNNNN-NNNN is an industrial converter. It is part of EFC3610 product line from Bosch Rexroth. For performance as per manufacturer specifications, the converter should be installed in environments where the relative humidity is less than 90%, the altitude is less than or equal to 1000 meters and the ambient temperature is between -10 and 45 degrees Celsius. The output of the converter derates by 1% for every 100 meter increase in altitude between 1000 and 4000 meters. The converter output also derates by 1.5% for every 1.5 degree increase between 45 and 55 degrees Celsius. Housing of the EFC3610-2K20-1P2-MDA-NN-NNNNN-NNNN has IP20 protection rating. The converter is designed for installation in only the vertical orientation. Minimum recommended separation distances are as follows: 125 millimeters towards both the top and bottom sides and 10 millimeters of horizontal separation.

The EFC3610-2K20-1P2-MDA-NN-NNNNN-NNNN weighs approximately 2.6 kilograms and measures approximately 231 x 120 x 175 millimeters. Screw size recommended for converter mounting is M4 and these screws can be used when the converter is being wall mounted. Additionally it can also be mounted on a DIN rail. The input of the EFC3610-2K20-1P2-MDA-NN-NNNNN-NNNN is designed for single phase 200 Volts AC input. Bosch recommends use of copper wires only which are rated for 90 degrees Celsius with XLPE or ERP insulation. Shielded power cables should be used for the power connections. Heavy duty and normal duty power output ratings for the converter are 2.2 kilowatts and 10.1 kilowatts respectively. The EFC3610-2K20-1P2-MDA-NN-NNNNN-NNNN comes without a display. Integrated converter features include Modbus interface with Multi-Ethernet Modbus TCP, enhanced Volts/Hertz motor control, flex-control with standard I/O and Class C3 rated EMC filter. This unit can be shipped globally with a one-year warranty period from Wake Industrial.