Product Description

Bosch Rexroth provides services in the manufacturing of different automation equipment. The company is extremely concerned about its Customer satisfaction and provides a wide range of high-quality products.

The EFC3610-0K40-3P4-MDA-7P-NNNNN-NNNN model is protected by IP20 protection class which protects it from basic touch up to 12.5 mm but it will not provide any resistance against liquids. The frequency converter can operate normally at the ambient temperature of -10 to +45 ͦC and it can be installed at the maximum altitude of 1000 meters above the sea level and with the further increase in 100 m the efficiency will also be decreased by 1%. The model can operate normally under humid conditions where the relative humidity is less than 90%. The model can take power from 3-phase AC 3 × 400V power supply through L1, L2, and L3 terminals at the operating frequency of 50 to 60 Hz with ±5% of tolerance. The frequency converter helps in converting the input frequency to 400 Hz output frequency to operate the AC motor at constant torque and speed.

The model EFC3610-0K40-3P4-MDA-7P-NNNNN-NNNN uses the Modbus protocol with an RS485 interface to communicate with motor and other I/O devices. Enhanced V/F motor control mode is used in this model to prevent the motor from changing the frequency at variable speed operations. The total weight of this model is 1.5 kg with 95 mm width, 167 mm depth, and 166 mm height. The external brake resistor can be attached to the device through (+) and B terminals to dissipate extra voltage produced by the decelerating motor. The AC motor takes connection through U, V, and W terminals. The model generates 0.4 kW of power at 1.3 A of maximum current and the heat loss at maximum output is 20 W. The model comes with a seven-segment display operating panel with some keys for manual programming. This unit can be shipped globally with a one-year warranty period from Wake Industrial.