1070080954-205
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
Available
The 1070080954-205 module from Bosch Rexroth has an input current rating of 2.4 A. This module may pose a health hazard if its electrical components get destroyed. It must be mounted only in the vertical orientation.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 1070080954-205 module from Bosch Rexroth is designed as a Class A device. This module must be installed in a clean environment. The product has a hot housing when its operation takes place. The device can be installed and serviced only by personnel who are familiar with the details specified in its manual. This unit can cause unfavorable situations if its electrical components are used in the destroyed state. It has a standard encoder interface. The module has a power demand of 0.89 A from the power supply unit. This product relies on a SERCOS interface for communication. This product deploys an air-cooling action to prevent the possibility of getting overheated. The device is meant to be installed at an elevation of 1000 m above sea level. The unit should be placed in a switch cabinet with dust filters at air entry and exit points. It has chances of getting damaged as a result of incorrect handling. This module uses prefabricated connectors for its encoder and power connectors. The product cannot be operated on a standalone basis. This device is equipped with three phases. The unit has a floating transition between the two load conditions. Its ballast switch should be protected against overload by the braking energy of the associated motor. This module portrays a current derating of 0.15 A at a frequency of 4 kHz and maximum overload. The product supports a free combination of controls and drives from other manufacturers using its SERCOS interface. This device allows the programming of the SERCOS interface by a NC. The unit portrays a cycle time of 125 µs for its current controller. Its DC link connection is established using bus bars.
Frequently Asked Questions about 1070080954-205:
Q: What happens if the DM module is retrofitted or modified?
A: The DM module may cause environmental hazards if it is retrofitted or modified by the user.
Q: What are the fiber optics of the SERCOS interface of the DM module used?
A: The fiber optics of the SERCOS interface of the DM module are used to interconnect all modules with a SERCOS interface.
Q: How are the mechanics of the DM module optimized?
A: The mechanics of the DM module are optimized for power output.
Q: Is the DM module suitable for cold module engineering?
A: No, the DM module is not suitable for cold module engineering because it does not incorporate backplane mechanics.
Q: Where is the firmware status of the DM module stored?
A: The firmware status of the DM module is stored in the memory card of the SERCOS interface.
