Product Description

The DKS01.1-W050A-DS56-00-FW is a servo drive manufactured by Rexroth Indramat to control the MDD AC servo drive motor. In an industrial servo system, the DKS01.1-W050A-DS56-00-FW operates by amplifying the command signal it receives from the control systems and then transmitting the amplified signal to the MDD AC servo motor to generate a proportional response. The servo drive acts as an intermediary between the command system and the servo motor in the servo system.

The DKS01.1-W050A-DS56-00-FW servo drive is quite efficient for industrial applications for several reasons. First, the servo drive is self-adjusting; using its motion sensors and pre-programmed algorithm, the servo drive can monitor the positing and speed of the servo motor, compare it with the command sent from the control system, and also correct any deviation of the servo motor from the commanded motor status. Though the DKS01.1-W050A-DS56-00-FW servo drive consumes a large amount of energy for its operation, it has an internal capacity battery that helps it deal with its high energy demand.

The DKS01.1-W050A-DS56-00-FW servo drive connects to the mains electricity using a three-phase power connection. This type of power connection is particularly efficient for the servo drive as it provides greater power density than the single-phase- connection system. The DKS01.1-W050A-DS56-00-FW servo drive has a rated current of 50 Amperes. During uses a continuous current of 25 Amperes, but can also use current as a peak current of 50 Amperes. The PMW frequency of the drive controller is 4 Kilohertz. If a current greater than 50 Amperes is sent into the servo drive, the drive immediately shuts off the supply of power to the drive using its integrated protection system; this response mechanism protects the drive from damage that might occur from an excess voltage or current. This unit can be shipped globally with a one-year warranty period from Wake Industrial.