Product Description

The DKR03.1-W200Z-BE30-01-FW is a drive controller from Bosch Rexroth for digitally controlling Rexroth Indramat motors. These controllers are widely used in the printing industry and machining industry. This controller can be customized and used for an application by the use of pre-programmed modules. These modules can be ordered while ordering the motor and go in slots U1-U5 on the body of the controller. Follow the instructions given in the documentation while setting up and using the controller. This product has protection rating of IP 20 which means it can be handled safely with fingers. It has the line code of 03. We provide this product to many locations in the world, through reputable logistics providers.

Operate this unit between 5 degree C to 45 degree C to get the ideal data from the controller and the motor. Take note that the application the controller is used in should conform with the national EMC regulations. After the product is switched off, the capacitors still hold charge for around 5 minutes. This drive uses a SERCOS interface for communication of commands. Do not make wrong or unclean electrical connection as they can make the controller behave dangerously. This could lead to workplace hazard. This can happen any time during the working of the controller.

Use an emergency circuit breaker to disconnect power from the unit while installation. This will ensure that the drive controller doesn’t start up on its own. While you are repairing or cleaning the drive, please use a master switch for isolating it from the mains. The drive controller emits around 1200 Watts of heat during operation. Please let the unit cool down for 10 minutes after shut down. This unit can be shipped globally with a one-year warranty period from Wake Industrial.