Product Description

The DKR02.1-W300N-BE56-01-FW is a drive controller which has been designed for digital intelligent control of the following Rexroth Indramat motors: LSF / LAF linear motors, 1MB frameless spindle motors and 2AD / ADF AC main spindle motors. The controller can be directly connected to three phase AC input at 400 to 480 Volts AC. The power supply on the controller can tolerate a variation in the AC supply of ±10%. The DKR02.1-W300N-BE56-01-FW also requires single phase AC input at 230 Volts AC for the control voltage. The control voltage power requirement is 200 VA. The rated current for the DKR02.1-W300N-BE56-01-FW is 300 Amps and the peak current is 212 Amps. The function numeric code is 56 and the version function numeric code is 01. The controller features a built-in blower for cooling.

Bleeder is not available on the DKR02.1-W300N-BE56-01-FW. Other controller features include digital servo and resolver feedback and SERCOS command communication. Rexroth delivers the controller as a completely configured unit. A configured DKR controller has four main components namely a basic unit, a software module, a command interface card and optional plug in modules. This modular architecture enables scalability and flexibility through the use of components to match the customer requirements. Firmware for the controller is a subitem and must be ordered separately. The firmware is the operating software for the system which is installed in the form of EPROMs on the software module. If required, the firmware can also be installed on a plug in module. Approximate weight of the DKR02.1-W300N-BE56-01-FW is 104 kilograms. Dimensions of the DKR02.1-W300N-BE56-01-FW are 1000 x 440 x 290 millimeters. The controller should be mounted in the vertical orientation. This unit can be shipped globally with a one-year warranty period from Wake Industrial.