Product Description

The DKC10.3-012-3-MGP-01V22 is a servo drive controller manufactured by Rexroth Indramat. This quality servo drive controller offers accurate and efficient control for servo motors in industrial servo systems. The DKC10.3-012-3-MGP-01V22 drive controller contains a firmware module that contains all the necessary programs needed by the drive to provide accurate and efficient control to industrial servo engines and automation systems. The drive uses a rated current of 12 Amperes and can generate a continuous power of about 48.9 watts in the connected servo motor.

The electrical cables used with the  DKC10.3-012-3-MGP-01V22 drive controller are divided into two major parts, which are the power cables and the signal cables. The power cables connect the drive controller to the mains electricity through either the single-phase or three-phase connection interface; the signal cables, on the other hand, helps the drive to exchange digital signals with both the motor and the control center. A minimum distance of 100 millimeters should be maintained between the power cables and the signal cables during wiring. The drive controller's power circuit is vulnerable to the passage of electrostatic signals from external objects into the drive controller, thus objects coming into contact with the drive controller must e discharged by grounding.

The DKC10.3-012-3-MGP-01V22 drive controller weighs about 1.8 kilograms; during operation, it can withstand a maximum ambient temperature of 55 degrees Celcius. The drive controller's maximum output voltage is 106 volts, while the maximum output current of the drive is 2.5 Amperes. The housing of the drive controller protects the controller from harmful solid materials large than 12 millimeters. The input frequency of the drive controller can either be 50 or 60 hertz.   This unit can be shipped globally with a one-year warranty period from Wake Industrial.