Product Description

Bosch is constantly innovating to provide customers with the best possible solutions. The product line includes drive controllers, frequency converters, drive converters, power supply modules, brake choppers, and inverter modules.

The DDS03.2-W030-BE56-01-FW model allows it to be combined with an AC servo and main drives to create a handy drive package that needs just one power supply unit. The DDS03.2 drive controller’s primary advantage is that it disperses a considerable amount of its heat outdoors. The IP 20 certification of the drive controller module protects it from dust but not water. If condensation does not occur, the maximum operational humidity level may surpass 95 percent. The drive controller has a continuous current rating of 12 Amps, and its functionality must be verified prior to implantation. The bus voltage of this Bosch Rexroth series 3 drive controller is 300 volts DC. The model has a SERCOS interface communication module and consumes 110 W of energy at 15 A of steady current. The model is designed for process control and monitoring, and it includes both digital and resolver feedback. The transport temperature range for the DDS03.2 drive controller should be between -30 and +85 degrees Celsius. Prior to delivering a product to a client, it is extensively inspected for flaws and sent by a reputed logistics partner.

The model DDS03.2-W030-BE56-01-FW working performance and efficiency are dependent on its software. In addition, firmware must be obtained independently from the remainder of the system. Consequently, reordering the same firmware version is always feasible. The firmware is routinely updated to enhance performance without compromising functionality. This drive controller (DDS03.2-W030-BE56-01-FW) is covered by a one-year replacement warranty from Wake Industrial.