Product Description

The Bosch Rexroth DDS02.2-W200-BA08-01-FW is a digital drive controller. It is part of the DDS drive controller family. The controller operates at 24 Volts DC input. Only power supplies with regulated DC output are permitted. The drive is designed for heat technology and dissipates heat inside the cabinet. For this reason large cabinets or air conditioning may be required. The specified ambient temperature range is 0 to 45 degrees Celsius. The maximum ambient temperature with derated data is 55 degrees Celsius. During storage and transportation, the permitted temperature for the DDS02.2-W200-BA08-01-FW is -30 to 55 degrees Celsius. Operation of the drive at altitudes above 1000 meters leads to output derating. The rated current output of the drive is 200 Amps. Protection category of the drive is IP20. This rating indicates limited protection against solids and no protection against liquid.

The DDS02.2-W200-BA08-01-FW controller supports digital servo feedback and resolver feedback. Therefore the controller can be used with servo motors that support either feedback method. Bosch motors that are compatible with DDS02.2-W200-BA08-01-FW include those from the MDD, MKD, LAF, 2AD and 1MB series. Typical applications for the drive and motor combination are textiles, printing and packaging machines and handling machines. Multiple command control modules are supported by DDS drives. The command control module installed on the DDS02.2-W200-BA08-01-FW is analog. Function ID of the DDS02.2-W200-BA08-01-FW is 08 and the function ID version is 01. The controller firmware is ordered as a separate subposition. Only trained personnel should handle the controller. Only approved accessories should be used. The DDS02.2-W200-BA08-01-FW should only be used for approved applications. Controller use for non-approved applications is considered improper use and leads to voiding of the warranty.