Product Description

The DDS02.2-W100-BA10-01-FW drive controller manufactured by Bosch Rexroth comes with two control input terminals for relay coils. The controller is associated with a line code of 2. The product can be connected to a PC or a VT-100 terminal with its X2 connecting point. This device must be installed inside a control cabinet. The unit should be mounted only after removing its faceplate and rating plate. These plates have to be refitted after the mounting process. It can operate at a maximum temperature of 55°C with derated data. This product should never be put to use with an unregulated power supply.

The device has to be assembled, installed, transported and stored properly for safe and optimum operation. The unit is designed for installation only in commercial machinery. Its operation as well as service actions must be carried out only by trained and qualified personnel. The drive controller deploys heat technology for cooling purposes. The product should be handled by taking the general safety and construction guidelines to work on an electrical power installation into consideration. This device has a discharge current of more than 3.5mA. The unit must be allowed to cool down after it has been turned OFF before working on it.

The controller might depict dangerous movements due to faulty control of the connected motor. These dangerous movements can take place at any point of time during operation. The product has up to four plug-in modules, a software module and the related firmware in its configured state. The configuration rating plate of the device features the term COVER for its empty slots. The unit dissipates heat within the control cabinet in which it is installed. It requires different software modules for different functions. The controller incorporates firmware that is updated on an ongoing basis. This drive controller with a one-year backup support period can be delivered to any destination across the globe.