Product Description

Bosch Rexroth manufactures industrial automation solutions in the form of functioning devices that are both cost-effective and reliable. Motion control devices manufactured by the firm include drive controllers, drive converters, frequency converters, inverter modules, and servo motors.

The DDS02.2-W050-BE25-01-FW model has a SERCOS interface and should be utilized between 0 and +45 degrees Celsius with a maximum absolute humidity of 25 g/m³. The DDS02.2 drive controller is unique in that the majority of the unit's energy is dissipated directly outside the control cabinet, rather than collected within. The model is EMC certified, which ensures that undesired radio frequencies are reduced. The model should not be utilized in any scenarios or locations that might be explosive, and the maximum relative humidity should not exceed 95%. The 7.5-kilogram drive controller has a 300-volt direct current bus voltage with a tolerance of 15%. This gadget enables precise and rapid adjustment of the position and speed of a connected servo motor using both digital and revolver motor feedback. The DDS02.2 drive controller is protected to IP20 standards and has a maximum continuous current of 50 amps and a maximum peak current of 50 amps.

The model DDS02.2-W050-BE25-01-FW has an air control cabinet and utilizes air as a coolant to maintain a constant temperature and minimize overheating. The model is applicable to a variety of driving scenarios and incorporates a number of software components. Drive instructions, drive parameters, and any required firmware would be included in software modules. This model's firmware is not included and must be bought separately. Wake industrial offers a one-year replacement warranty on the drive controller (DDS02.2-W050-BE25-01-FW), which can be delivered within a specified time period. The firm ships its items through a respected logistic provider.