Product Description

The DDS02.2-W050-BA01-01-FW is a DDS series servo drive offered by Bosch Rexroth. The drive features a current rating of 50A. It features a configuration type plate, firmware type plate and a type plate for the basic unit. The type designations of the firmware and the software module must be specified when ordering for a replacement software module. The device uses heat technology for its cooling action. Hence, the drive must be installed in a large control cabinet with support for air conditioning. The cooling takes place through air circulation inside the control cabinet. The product can also perform as a rapid response drive. It is a good choice for use with several motors from the same manufacturer in packaging, printing and textile machines.

The AC digital servo drive must be operated only if the application for which it is used complies with the required national EMC directives for the same. The live parts of this product must be covered before the machine in which it is used is switched on. The device may experience dangerous movements in case of a software error, faulty wiring or cabling. The firmware gets updated continuously to operate with increasing accuracy without altering the functions. The unit encompasses an analog interface for command communications. The DDS02.2-W050-BA01-01-FW can be delivered globally with a one-year Wake Industrial warranty.

The DRF01.1M analog interface plug-in module helps in actual position detection through a resolver or measuring voltages through two differential inputs. The drive makes use of an IKS0391 service cable for starting. The unit features a line code of 03. The unit can be installed and mounted quickly. The modular design allows the stacking of several drives together with just one power supply. The two analog diagnostic outputs have an output voltage of 10VDC and a current load capacity of 4mA.