Product Description

The Bosch DDS02.2-A200-BE56-01-FW is a digital drive controller from the DDS product line. As per the type code, the series is 2 and the version is also 2. The controller is deployed for motor control in industrial control systems. It is compatible with various types of Bosch motors including those from the MDD, MKD, LAR, LAF, 2AD and 1MB product line. The controller supports digital servo feedback and resolver feedback. This allows use of the controller with motors that support either of the feedback mechanisms. Each DDS controller features a software module that houses the firmware and programmed drive parameters. Each DDS controller also features a command communication module which in the case of the DDS02.2-A200-BE56-01-FW is SERCOS. This module allows high-speed real-time serial communication between SERCOS enabled control devices.

The basic unit of the DDS02.2-A200-BE56-01-FW controller has three slots that can be used for a wide range of optional modules. This modular architecture allows controller adaption to any number of customer requirements. Nominal output of the DDS02.2-A200-BE56-01-FW is 200 Amps. This value is valid if the controller is deployed for approved applications and used under specified ambient conditions. DDS controllers are designed for airflow inside the control cabinet or for airflow outside the control cabinet. The DDS02.2-A200-BE56-01-FW is designed for airflow outside the control cabinet with a large portion of the heat dissipation taking place outside the cabinet. This cooling design allows mounting of the controller inside compact control cabinets. Approximately 80 millimeters of space should be left above and below the mounted controller for ventilation. Height of the DDS02.2-A200-BE56-01-FW is 355 millimeters, the depth is 325 millimeters and the unit width is approximately 105 millimeters.